Specifications
- ARM Cortex-M4 32-bit @ 300MHz (Subblock of Akida)
- RAM: 256M x 16 bytes LPDDR4 SDRAM @ 2400MT/s
- FLASH: Quad SPI 128Mb NOR @ 12.5MHz
- Onboard Akida core current monitor
- Operates under Linux on arch or x 86-64 architectures
- GPIO: 2 LED’s
- Interfaces: 5GT/s PCI Express 2.0 x 1-lane
- 40mm x 76mm x 5.3mm (exc. PCIe rear panel bracket)
- Weight: 15g (exc. PCIe rear panel bracket)
- Small form factor PCIe 1.6” x 3 – rear panel PC bracket included
Specifications
- Host CPU: NXP i.MX 8M Plus Quad SOC
- AI/ML Accelerator: 2 x AKD1000
- On Board Memory: 4GB LPDDR4
- Supports Linux Embedded OS Version 6.1
- Storage: 32GB eMMC and Supports Micro SDXC card up to 1 TB
- Display: 1 x HDMI Output with Max Resolutions of 3840 x 2160p30 Pixel clock up to 297MHZ
- Network Connectivity:
- Wi-Fi: 802.11 ac/b/g/n/c (2.4GHz/5GHz)
- Ethernet: Two Ports (10/100/1000)mbps
- Ethernet Port supports external camera interface
- Max Encode: 1 x 1080P60 (H265 & H264)/2 x 1080P30 (H265 & H264)/ 4 x 720P30 (H265 & H264)
- Max Decode: 1 x 1080P60 (H265 & H264)/2 x 1080P30 (H265 & H264)/ 4 x 720P30 (H265 & H264)
- USB 3.0 Port Type A
- USB 2.0 Port Micro B (Flashing and Debug port)
- 2x RGB LED For Status Indication
- Power Input: 12VDC Input Using External AC-DC Adapter
- Unit Dimensions: 110mm x 110mm x 56mm (L x W x H)
Specifications
Storage – SATA / M.2
- 1x 2.5″ bay for SATA hard disk or SSD, max. 9.5 mm
- 1x M.2-2280M slot (supports PCIe x4 NVMe or SATA)
- 1x M.2-2230AE for an optional WLAN card
Connectors
- HDMI 2.0a
- D-Sub VGA
- 4x USB 3.2 Gen 1
- 4x USB 2.0
- 1x USB 2.0 internal USB stick
- 2x audio (line out, mic)
- Intel Gigabit LAN (RJ45)
- Connector for the external power button
- “Always-On” jumper
- DC input
Power Supply
- External 180 W / 19.5 V power adapter
Slim Design
- Robust 3-liter steel chassis, black
- Dimensions: 250 x 200 x 78.5 mm (LWH)
- Including VESA mount (75/100 mm)
- Supports 24/7 Non- stop Operation
- Operating temperature: 0~50 °C (non-condensing)
Processor Support
- Socket LGA1200 supports 10th-gen Intel Core i9/i7/i5/i3, Pentium Gold, and Celeron processors, codenamed “Comet Lake-S,” max. 65W TDP
- Includes Heatpipe cooling system with two fans
Memory Support
- 2x 260-pin SO-DIMM slot
- Supports DDR4-2933/2666
- Max. 2 x 32 GB
PCIe x16 Slot
- 1x PCI Express X16 v3.0 slot
- Supports single-slot expansion cards with max. 208 x 120 x 30 mm in size and max. 75 W TDP
- Onboard 5V auxiliary voltage (max. 2 A) with 4-pin Molex adapter cable
- Small form factor PCle 1.6″ x 3
Package Includes
- Intel H410 Chipset
- Includes Akida on PCle Board installed in the development kit
Operating System
- Linux Ubuntu 20.04
Specifications
- SoC: Broadcom BCM2711C0 quad-core ARM Cortex-A72 (ARMv8-A) 64-bit @ 1.5GHz
- GPU: Broadcom VideoCore VI
- RAM: 1GB, 2GB, 4GB, or 8GB LPDDR4 SDRAM
- Networking: Optional 2.4 GHz and 5 GHz 802.11b/g/n/ac Wi-Fi, Gigabit Ethernet PHY
- Includes Akida on PCIe Board installed in the development kit
- Includes Meta TF Software Development Environment
- GPIO: Carrier board dependent
- Interfaces: PCI Express, 2× DSI, 2× CSI, 2× HDMI
- Small form factor PCIe 1.6” x 3
- Storage: External (CM4 Lite); on-board 8GB/16GB/32GB eMMC (CM4)
- Ports: Hirose U.FL antenna connector, 2× 100-pin high-density connectors
- 20.06cm x 10.5cm x 3.7cm (exc. carrier board)
- Bluetooth: Optional Bluetooth 5.0 and Bluetooth Low Energy (BLE)
- Includes User Guide and examples of Akida Models
